xnet-1.4.1.jar
on Jan 26, 20231.4.1:
- Added some null protection that could be needed when something is trying to move the xnet cables
-
Hilight cables if you are holding a facade/cable even if they are not hidden by a facade. Only while sneaking (can be disabled in config)
- thraaawn added api method to get a list of all connected blocks
-
Fixed a null pointer exception with facade blocks in certain situations
-
XNet supports pistons directly now
xnet-1.12-1.4.0.jar
on Jan 26, 2023xnet-1.4.0.jar
on Jan 26, 20231.4.0:
- Removed CommandGen command
-
Implemented a search bar with hilighting in the controller. Makes it easier to search your device on the network
-
Made the router gui a bit more compact so that longer controller names are easier to use
-
Fixed a bug where removing a configuration for a block on a connector with other blocks on that same connector might remove the wrong configuration
- If you hold a connector, cable, or facade all other cables and connectors covered by facades will be hilighted in the appropriate color. That makes it easier to examine your hidden XNet network
-
Added the ability to disable directions for a connector. Helps relieve clutter in the gui and also makes the cables less confusing in case you don't need some connection. To do this you need to access the GUI of the connector
xnet-1.12-1.3.5.jar
on Jan 26, 20231.3.5:
- All recipes work
xnet-1.12-1.3.4.3.jar
on Jan 26, 20231.3.4.3:
- For some reason people don't like to crash when they open the gui of the controller. So I fixed it
xnet-1.12-1.3.4.2.jar
on Jan 26, 20231.3.4.2:
- Correct version so that rftools works with this
xnet-1.12-1.3.4beta2.jar
on Jan 26, 20231.3.4beta2:
- Fixed an accidental hard dependency on redstoneflux
xnet-1.12-1.3.4.jar
on Jan 26, 20231.3.4:
- Updates for latest Forge
- Uses the new redstoneflux energy api
- Needs McJtyLib 2.4.0
xnet-1.12-1.3.3.jar
on Jan 26, 20231.3.3:
- Fixes for latest Forge
- Required McJtyLib 2.3.13
xnet-1.12-1.3.2beta.jar
on Jan 26, 2023First release of XNet for 1.12. Note that not all recipes work
xnet-1.3.2.jar
on Jan 26, 20231.3.2:
- Fixed a serious exploit where breaking a cable would not prevent the controller from doing its job. i.e. unintentional wireless networking!
xnet-1.3.1.jar
on Jan 26, 20231.3.1:
- Fixed a bug with a router that only had local channels. It would not immediatelly update the network so after publishing channels the effect was not immediatelly visible
- Added more colors for logic channels
xnet-1.3.0.jar
on Jan 26, 20231.3.0:
- Support for direct insertion/extraction out of a storage scanner using the normal 'item' channel type.
- Crash fix for facade blocks when used with blocks that don't have a proper getItem() in their itemstack
- New cleaner cable textures
- Fixed a bug which could prevent proper updating of network information when changing the network
- Doubleclicking a block in the controller gui will highlight that block in the world (just like the storage scanner does in RFTools)
- New upgrade kit to upgrade connectors to advanced connectors
- RFTools is not required but if it is present it has to be version 6.00!
xnet-1.2.0.jar
on Jan 26, 20231.2.0:
- Connectors will now display how much energy they contain in TOP and WAILA compatibles
- It was not possible to use facades on advanced connectors. Should work again now
- Fixed connectors not connecting to blocks that only support old style RF and no capabilities
- In addition connectors will now connect to more blocks for redstone support and also to redstone lamps
- Implemented new redstone output mode for the logic channel. This means the logic channel now has two connector types. The old 'sensor' mode is still present and default but you can now switch to 'output' where you can output a redstone signal based on colors enabled on the network
- Fixed a model error log spam (not visible in game)
- Doubled the possible speeds of the logic channel because it needs a bit more accuracy (so advanced connectors can go down to 5 ticks per operation)
xnet-1.1.5.jar
on Jan 26, 20231.1.5:
- Fixed a crash bug on 1.10.2 that could happen when you have a specific number of items in the output
xnet-1.1.4.jar
on Jan 26, 20231.1.4:
- Ore dictionary support for chests and lapis in recipes
- Fluid rate is now configurable
- New Redstone Proxy block. This block has no functionality or anything. It doesn't do anything. The only thing special about it is that a connector will connect to it which allows you to use a logical channel and a sensor to read out the redstone that goes into this block. In the future this block will also be used to transmit redstone
xnet-1.1.3.jar
on Jan 26, 20231.1.3:
- Removed some log spam
- Fixed a problem when adding a single connector to a router without that connector being connected to anything
- Nikolaj Raspopov added Russian translation
- Fixed a crash on 1.10.2 in when insert items with a count limitation in some situations
- Fixed a potential threading race issue in the renderer
xnet-1.1.2.jar
on Jan 26, 20231.1.2:
- Fixed a routing bug with routers that were not part of a routing network (i.e. a single router that connects multiple local networks). They would not be able to connect channels locally
- Fixed a power duplication exploit in some specific setups
- Fixed ore dictionary matching for items
- Fixes to finally get the tooltip names of cables and connectors right in 1.10 too
- Changed the color of a published remote channel green because red is usually associated with an error
- Requires McJtyLib 2.3.11
- Requires CompatLayer 0.2.5
xnet-1.1.0.jar
on Jan 26, 20231.1.0:
- Item and fluid distribution is now very precise in combination with the minimum/maximum settings for a connector. Previously XNet would allow an insertion or extraction to happen if the condition was met. For example, say you specified to keep 1000mb in a tank while extracting. At some point the tank contains 1500mb and you are extracting 1000mb. That extraction would succeed because there is more then 1000mb in the tank and it would extract 1000mb which leaves only 500mb instead of the expected 1000mb. This is now changed. In this situation it will only extract 500mb and keep exactly 1000mb in the tank. Same for items and also for insertion. This allows for more precise amount management but it is a behaviour change. So if you depend on the old behaviour you will have to change things a bit.
- The connector will now update the network if an adjacent block is placed that wasn't there before. That means that if you place a new block next to a connector it should now always show correctly in the list of blocks in the controller GUI.
- New pulse mode for redstone control. This mode will let the connector do exactly one operation when a pulse is received. This way you can very precisely insert individual items in blocks (for example) whenever a redstone pulse is received. Note that when you have operations that are timed slow (i.e. 200 ticks between every operation for example) multiple redstone pulses in the idle time will still count as one pulse.
xnet-1.0.1.jar
on Jan 26, 20231.0.1:
- Maximum RF/rate for normal and advanced connectors (10000 RF/t for normal and 100000 RF/t for advanced)
- Better tooltips for the gui. Also note the maximum number of RF/t in the 'rate' field